신고사유
신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.
상품명 | [Louet] 루엣 드럼카더 주니어 72Tpi |
---|---|
판매가 | 720,000원 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
수량 |
월 렌탈 금액 |
월 원 (개월 기준)
|
---|
구매방법 | |
---|---|
배송주기 |
정기배송 할인 save
|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Louet Drum Carder Junior / 72 tpi
Same as Louet Standard Carder but just four inches wide for easy roving making.
Louet Standard Carder와 동일하지만 너비가 4 인치 밖에 안되기 때문에 쉽게 로빙을 만들 수 있습니다.
If you card fibers occasionally or card for small projects, this is the carder for you. It has the same carding cloth and solid construction as the Standard Drumcarder, but is only 4" wide. It is perfect to use to card fibers for small projects like for socks, hats and scarves. You can produce a 4" wide batt that can be spun from when you remove the batt from the carder. The batt that is created is the size of a commercial roving. You can also thoroughly blend colors on this model. It is a great introduction to the world of drum carding.
An instruction manual written by well known author and fiber artist Deb Menz is included with all drumcarders.
The Louet Drumcarders are made of laminated birch and have a hard white coating. In order to ensure a long life, the teeth on all Loue?t carders are made of high grade plated steel wire. All gearboxes (except on the Elite) are enclosed to prevent fibers entering the gear system.
For drumcarders it is common to mention the gear ratio that drives the licker-in when you rotate the large drum. However, what really counts for carding is the ratio of the surface speed of both drums, because the difference of surface speed does the carding. You get this surface speed ratio by multiplying the gear ratio with the ratio of the diameters of the large drum and the licker-in.
가끔 개인 작업을 하거나 소규모 프로젝트를 진행 한다면 본 제품을 추천합니다. 루엣의 표준형 드럼카더와 같은 방식으로 제작되고 같은 카딩 클로쓰를 가지고 있지만 사이즈가 4인치 밖에 되지 않는 모델입니다. 양말이나 모자 스카프 같은 제품을 위한 카딩에 어울리는 제품입니다. 4인치 너비의 배트를 카더에서 분리하여 바로 작업이 가능합니다. 배트는 상업 로빙의 사이즈에 맞춰 나온 사이즈 입니다. 컬러의 믹스도 자유롭습니다. 드럼카딩을 처음 접하는 분들에게 추천하는 모델입니다.
섬유 아티스트이자 유명작가인 뎁 멘데즈의 사용설명서가 모든 드럼카더 모델에 첨부되어 있습니다. 루엣의 드럼카더는 적층된 자작나무로 제작되었고 수제 화이트 코팅으로 마감되었습니다. 오랫동안 사용하기 위해 모든 루엣의 드럼카더에는 고품질의 스틸 와이어 이빨이 자라히고 있습니다. 엘리트 모델을 제외한 모든 제품에는 섬유가 기어 시스템으로 흘러 들어가는걸 막기위해 기어박스가 설치되어 있습니다.
일반적으로 모든 드럼카더에는 드럼이 돌아가는 기어비에 대한 명시가 필수로 들어갑니다. 하지만 진정 중요한 부분은 양 드럼의 표면 속도입니다, 카딩시 표면의 속도가 카딩의 퀄리티를 결정하기 떄문입니다. 표면 스피드 비율은 큰 드럼과 릭커 인의 면적비와 기어비를 곱하면 얻을 수 있습니다.
Video :
드럼카더는 드럼모양의 카딩기로
아트뱃이나 양모 등을 서로 섞는데
사용하는 제품 입니다.
양모에 남아 있는 건초 및 이물질을 카딩하여
제거하는 용도로도 사용되고 있습니다.
[스튜디오분트에서 직접 카딩한 아트뱃 입니다.]
스튜디오 분트에서는
드럼카딩 및 핸드카딩을 하시는데 필요한
다양한 종류 및 색상의 양모를 판매하고 있습니다.
드럼카더를 이용하여
나만의 실을 만들어 보시길 바랍니다.
게시물이 없습니다
게시물이 없습니다